Reef
Status™: Calcium This kit measures all types
of calcium, including gluconate calcium. The method is based
on specific titration with a unique indicator. Measures in increments
of 5 mg/L. Each kit runs 150 tests.
|
Reef
Status™:Strontium This kit measures strontium
by first seperating the strontium in the sample by a chemical
precipitation and filtration, followed by a sensitive titration
in 0.5 mg/L increments. Each kit runs 50 tests. Now uses an
easier to read non-fluorescent indicator!
|
|
|
|
|
|
|
Reef
Status™: Magnesium Four kits in one! Tests for
magnesium through a titration based procedure in increments of
12.5 mg/L. Tests for carbonate alkalinity, borate alkalintiy and
total alkalinity in 0.1 meq/L resolution through a titration based
procedure. The kit resolves borate from carbonate and, along with
magnesium, this presents a clear picture of the tank's buffering
capacity as well as a very reliable determination of the critical
carbonate content required for coral and coraline growth. Each
kits can perform 75 determinations for each test.
|
Multitest:
Marine Basic This kit combines the Marine pH & Alkalinity,
Ammonia and Nitrite & Nitrate kits into one kit.
Multitest:
Reef Special This kit combines the Phosphate, Silicate,
and Iodine/Iodide kits into one kit.
|
Multitest:
Ammonia This kit measures total (NH3 and NH4+) and free
ammonia (NH3 only) down to 0.05 mg/L and is virtually interference
free in marine and fresh water. Free ammonia is the toxic form
of ammonia (vs. ionized Ammonia NH4+ which is non-toxic) and thus
it is much more important to keep an eye on the level of free
ammonia in your system. This kit is based on the same gas exchange
technology that is used in the Ammonia Alert™ and thus is
the only kit on the market that can read levels of free ammonia
while using ammonia removal products such as Prime™, Safe™,
AmGuard™ and any similar competing products. The other kits
(salicylate or Nessler based) determine the total ammonia by raising
the pH of the test solution to 12 or greater. At this high pH
all ammonia removal products will breakdown and rerelease the
ammonia, thus giving you a false ammonia reading.
|
MultiTest:
Marine ph & Alkalinity™ features a unique dye
that has a pronounced color change between 8.0 and 8.3, making
it the easiest kit on the market to read in that critical range.
Alkalinity may be read from the same sample in 0.5 meq/L increments
|
MultiTest:
Nitrite & Nitrate™ This kit measures nitrite
down to 0.2 mg/L and nitrate down to 2 mg/L in marine or freshwater.
|
MultiTest:
Iodine & Iodide™ This kit measures iodine or
iodide to less than 0.005 mg/L. Seachem stands alone in offering
this important test to the reef aquarian.
|
MultiTest:
Iron™ This kit measures iron in freshwater or marine
water to less than 0.05 mg/L. Can also measure chelated iron.
|
MultiTest: Phosphate™ This kit measures
inorganic phosphate down to 0.05 mg/L, producing a unique easy
to read yellow-green-blue color range in marine and freshwater.
|
MultiTest:
Silicate™ This kit measures silicates down to 0.5
mg/L in marine or freshwater.
|
Ammonia Alert™ is an innovative color device
for continuously detecting and monitoring toxic free ammonia.
A sensor changes reversibly from yellow to green to blue, relative
to the ammonia concentration. No test kits, chemicals, or procedures
are needed. The device detects less than 0.05 mg/L (ppm) free
ammonia and alerts you to the #1 killer before any sign of stress.
It lasts over a year and replacement sensors are available. Marine
or freshwater use.
|
|
|
|